|
DreamBox DM5620 digital satellite receiver, Crown-sat is where you can get DreamBox DM5620 with low price and high quality.
Crown-sat is a professional digital satellite receiver and network media player(mediaMVP) manufacturer. Our products including FTA, FTE, CA, CI(MULTI cam), and card sharing, like DreamBox DM5620, Dm500c, Dm500s, Dm500, DreamBox 7020, Dm600PVR, Dm8000, Starbox ITS5400, VN800CIS, MetaboxIII (Metabox ca), KOAN KSF220. We also supply network media player(mediaMVP) (we also called media player), satellite receiver accessories: remote control, power supply, and RS232 cable, etc.
DreamBox receiver: DM5620
Powerful receiver for digital TV and Radio programs.
Main features are a 250 MHz IBM PowerPC(350 Mips), Linux OP and RF-Modulator
The DM5620 has one RF-Modulator-Connector, so it is possible to connect the box to your TV even it doesn't have a Scart connector.
10/100MBit compatible Ethernet Interface
| DreamBox DM5620 Features: |
- - 250 MHz IBM PowerPC Processor (350 Mips)
- - Linux Operating System
- - 2 x DVB Common-Interface
- - 1 x Smartcard-Reader
- - MPEG2 Hardware decoding
- - V.24/RS232 Interface
- - 10/100Mbit compatible Ethernet Interface (only DM5620)
- - 4-digit 7-segment display
- - Up to 64 MByte of RAM
- - unlimited channel lists for TV/Radio
- - channel-change time < 1 second
- - full automatic service scan
- - supports directly bouquet-lists
- - supports EPG (electronic program guide)
- - supports multiple LNB-Switching control (supports DiSEqC)
- - fully adaptable OSD in many languages and skin-support
- - SPDI/F Interface for digital bit stream out (AC-3 / DTS)
- - RF - Modulator and Video/Audio-Cinch out
- - 2 x Scart-interfaces
DreamBox DM5620 technical data
DBS-Tuner:
Frequency Range 950 .. 2150 MHz
Signal Level - 65 dBm .. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1
Common-Interface:
Common-Interface Power Consumption max. 0,3A/5V
Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable
VCR-Scart:
FBAS
Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware
Ethernet (only DM5620):
10/100 MBit compatible interface
Function: Update of Firmware, Connect to PC
LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode
Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
Power consumption:
< 20W (in operation, horizontal polarization / 400mA LNB current)
< 11W (in operation, without LNB)
Input voltage:
230V / 50 Hz alternating acurrent +/- 15%
Physical specification:
Ambient Temperature +15°C...+35°C
Humidity < 80%
Size (W x D x H): 370 mm x 242 mm x 65 mm
Weight: 1,0 kg
|
|